ORDERING INFORMATION
Basicon all fittings is 04-00XXX,complete theby filling in the last 3 digits after selectingthe fitting you need according to the details below. Example: 04 -00102.
First Code Number- Determines the style of the fitting.
-1:One port in the end with two ports out, 90° cross drilledwith one port per side. 3 ports total. Two Mounting Holes.
-2: One port in the end with four ports out, 90° crossdrilled with two ports per side. 5 ports total. Two MountingHoles.
-3: One port in the end with six ports out, 90° crossdrilled with three ports per side. 7 ports total. Four MountingHoles.
-4: One port in the end with eight ports out, 90°cross drilled with four ports per side. 9 ports total. Four MountingHoles.
-5: One port in the end with four ports out, 90° drillingwith four ports on one side only. 5 ports total. Two MountingHoles.
Second Code Number- Determines the style of porting.
-0: Allthe ports are the same.
-1: Inlet port is one size larger than outlet ports.
-2: Inlet port is two sizes larger than outlet ports.
Third Code Number- Determines the inlet port size.
-2: 1/8-27taper pipe thread (NPT)
-4: 1/4-18 taper pipe thread (NPT)
-6: 3/8-18 taper pipe thread (NPT)
-8: 1/2-14 taper pipe thread (NPT)
In the example above – 04 -00102, this would be a 1/8 NPT inlet with twooutlets of the same size.
Example – 04 -00326, this would have a 3/8 NPT inlet with six 1/8NPT outlets.
Dimensions: .75X1.5X4
